Our most popular MIG wire, SuperArc® L-50, premium copper coated wire, is an excellent choice for 50,000 psi (345 MPa) yield strength, carbon steel base materials. SuperArc® L-50 has moderate levels of silicon and manganese for deoxidation and cleaning action. Designed for use on clean, oil-free, and rust-free base material. Will tolerate light millscale. SuperArc® L-50 also has an excellent reputation for feedability and trouble-free performance. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.

ESAB MIG-6 is used for welding carbon sheet steel and plate of various thicknesses. Typical applications include automotive, heavy equipment, structural pipe, and HVAC duct work.

ER70S6 is a mild steel welding wire that contains high levels of manganese and silicon which produces high quality welds when used on dirty, oily, or rusty steel The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance resulting in minimal post-weld grinding S-6 wire is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength of all the plain carbon steel wires This product requires a shielding gas of CO2 and/or CO2 mix; conforms to AWS 5.18 and CSA 48.4

Our most popular MIG wire, SuperArc® L-50, premium copper coated wire, is an excellent choice for 50,000 psi (345 MPa) yield strength, carbon steel base materials. SuperArc® L-50 has moderate levels of silicon and manganese for deoxidation and cleaning action. Designed for use on clean, oil-free, and rust-free base material. Will tolerate light millscale. SuperArc® L-50 also has an excellent reputation for feedability and trouble-free performance. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.

Our most popular MIG wire, SuperArc® L-50, premium copper coated wire, is an excellent choice for 50,000 psi (345 MPa) yield strength, carbon steel base materials. SuperArc® L-50 has moderate levels of silicon and manganese for deoxidation and cleaning action. Designed for use on clean, oil-free, and rust-free base material. Will tolerate light millscale. SuperArc® L-50 also has an excellent reputation for feedability and trouble-free performance. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.

36" straight lengths designed for gas tungsten-arc (GTA) welding or brazing operations. The AlcoTec cleaning system and quality control process routinely ensures surface cleanliness and metallurgical integrity of the rods. Each rod is also embossed with the alloy identification every six inches.

E71T-GS is an all-position, single-pass, flux cored welding wire designed to weld carbon steel.

4043 Aluminum wire on a 16 pound spool designed to be run on a MIG welder.

SuperGlaze® 4043 is a great choice for the welding of heat-treatable base alloys and more specifically the 6XXX series alloys. It has a lower melting point and more fluidity than the 5XXX series filler alloys and is preferred by welders because of its favorable operating characteristics. ER4043 type wires are also less sensitive to weld cracking with the 6XXX series base alloys. SuperGlaze® 4043 is suitable for sustained elevated temperature service, i.e. above 150 °F (65 °C).

Our most popular MIG wire, SuperArc® L-50, premium copper coated wire, is an excellent choice for 50,000 psi (345 MPa) yield strength, carbon steel base materials. SuperArc® L-50 has moderate levels of silicon and manganese for deoxidation and cleaning action. Designed for use on clean, oil-free, and rust-free base material. Will tolerate light millscale. SuperArc® L-50 also has an excellent reputation for feedability and trouble-free performance. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.

Our most popular MIG wire, SuperArc® L-50, premium copper coated wire, is an excellent choice for 50,000 psi (345 MPa) yield strength, carbon steel base materials. SuperArc® L-50 has moderate levels of silicon and manganese for deoxidation and cleaning action. Designed for use on clean, oil-free, and rust-free base material. Will tolerate light millscale. SuperArc® L-50 also has an excellent reputation for feedability and trouble-free performance. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.

316 HISIL has a higher silicon content along with a low carbon content, producing improved arc stability, smoother bead appearance, and excellent resistance to carbide precipitation

It's low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product LFBFC comes with a flux coating so no additional flux is required. Preheating is recommended for some applications Low fuming bronze flux coated is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel

All-position handling and multiple pass capabilities on DC+ X-ray quality welds achievable

Red Baron 308L MR is designed for joining type 304 and 304L stainless steels and other common austenitic stainless steels referred to as "18-8" steels.

316 L is used for welding 316 stainless that may be exposed top organic and inorganic acids

316 HISIL has a higher silicon content along with a low carbon content, producing improved arc stability, smoother bead appearance, and excellent resistance to carbide precipitation

Highest deposit rate and fastest speed All position welds usually on irregular, poorly fit and thicker steel

RG60 is a high strength alloy used for gas brazing of low carbon and low alloy steels Used in applications where a high tensile strength is needed The high silicon and manganese content in the product eliminates the need for flux when welding

Low fuming bronze bare is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel It's low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product Preheating is recommended for some applications and a bronze brazing flux is required

This high nickel-content electrode is good for castings of light to medium weight Welds are easily produced in all positions and the deposits are readily machined

Low fuming bronze flux coated is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel It's low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product LFBFC comes with a flux coating so no additional flux is required. Preheating is recommended for some applications

309 L is excellent for buttering passes and overlay work

ER70S2 is a premium MIG & TIG wire for welding on all grades of mild and carbon steels, producing quality welds with minimal porosity It is a triple deoxidized wire (Zirconium, Titanium, and Aluminum) making it an excellent choice for welding over rust and mill scale No flux is required with this product This wire is available spooled or in cut-length form 36” lengths of this product are embossed on both ends for easy identification

308 HISIL has a higher silicon content along with low carbon content Improved arc stability and smoother bead appearance, excellent quality fillet and butt welds

For AC welders Deep penetration makes this acceptable for dirty, painted, greasy, or galvanized metal Best choice for sheet metal edge

308L contains an average .03% carbon, producing a weld deposit with good resistance against intergranular corrosion caused by carbide precipitation

Copper silicon manganese alloy Silicon Bronze is a copper based filler metal primarily used for MIG, TIG and oxyacetylene welding of copper, copper-silicon and copper-zinc base metals to themselves and to steel Can be used for on plain or galvanized steel sheet metal Can also be used for surfacing areas subjected to corrosion

There’s a long list of reasons why operators are so loyal to Excalibur™ 7018 MR. They tell us they love the clean puddle, the square coating burnoff, the easy all-position handling and the excellent wash-in characteristics.

RG45 is a general purpose, copper coated, gas welding rod used for welding low carbon steels up to ¼” thick It is a great selection when ductility and machinability are most important You do not need a flux when brazing with this product

ER5356 is a general-purpose type aluminum alloy Typically chosen for its relatively high shear strength Offers excellent corrosion resistance when exposed to salt water ER5356 should be used for welding 5000 series aluminum base metals 36” lengths of this material are embossed on both ends for easy identification